Filter cartridges, pack of 2, for Filtrinov MX18 and MX25
Filter cartridges, pack of 2, for Filtrinov MX18 and MX25

Filter Cartridge x2 for Filtrinov MX18 and MX25

CARTFILTMX
€186.00
Tax included

This Filtrinov-compatible cartridge for MX18 and MX25 fits Filtrinov MX18 filter units as well as the MX25 filter.

With this Filtrinov-compatible cartridge, you get high-quality filtration. Your water will be clear and thoroughly cleaned. Cartridge filtration is far more economical and effective than any other standard filtration system. Easy to use, a Filtrinov cartridge is simple to fit.

  • Sold in packs of 2
  • Height with handle: 390 mm
  • Height without handle: 365 mm
  • Outside diameter: 175 mm
  • Top: Handle
  • Bottom: 72 mm opening
  • Filtration rating 25 microns
  • Filtration area: 45m2
  • Compatible with Filtrinov filter units / filter walls, references MX18 and MX25

Ask us if you have any concerns that this is the right reference for your installation.

Cleaning should be done at least once a month, depending on the usage rate of the pool and the size of the chosen filter. The lifespan of the cartridge is approximately two seasons, depending on usage and cleaning frequency.

To extend the life of your cartridges and improve filtration fineness, we recommend using the following products:

NETSKIM - Basket pre-filter
FLOVIL - Ultra-concentrated clarifier

These products are available on our site.

  • Card, Paypal, Bank Transfer
  • Delivery in 24/72h
  • 100% satisfied customers.
  • Worldwide Delivery Available
 

This Filtrinov-compatible cartridge for MX18 and MX25 fits Filtrinov MX18 filter units as well as the MX25 filter.

With this Filtrinov-compatible cartridge, you get high-quality filtration. Your water will be clear and thoroughly cleaned. Cartridge filtration is far more economical and effective than any other standard filtration system. Easy to use, a Filtrinov cartridge is simple to fit.

  • Sold in packs of 2
  • Height with handle: 390 mm
  • Height without handle: 365 mm
  • Outside diameter: 175 mm
  • Top: Handle
  • Bottom: 72 mm opening
  • Filtration rating 25 microns
  • Filtration area: 45m2
  • Compatible with Filtrinov filter units / filter walls, references MX18 and MX25

Cartridge filtration

Cartridge filtration is more economical than standard sand filtration and more effective thanks to the fineness of the filter. The quality of a good filter depends on the quality of the filter media, but also on matching the pump flow rate correctly to the filter surface area. This is known as the filtration rate. On a cartridge filter, the filtration rate should be < or = 2.00 m³/h/M3 for effective filtration. The MX18 and MX25 filter units offer a good filtration rate and a filtration fineness of 25 microns.

Washing the cartridge

To clean the cartridge, simply remove it from the filter. You can wash it with a hose while brushing it, or leave it to dry in the open air. Dirt and dust then come off more easily; then rinse with cold water. How often the cartridges need cleaning depends on the pool environment. Cleaning once a week is a good way to make sure filtration stays effective. A cartridge filtration system has the advantage of not using pool water for cleaning.

Note that the MX18 and MX25 filters are compatible with salt water electrolysis.

Find out more about the MX18 / MX25 filter unit

The filter unit is a technical enclosure that houses your filtration system without buried pipework: everything is built in, even the suction and return lines. The Filtrinov MX18 filter unit is suitable for all types of pool up to a maximum of 80 m³ of water, while the Filtrinov MX25 filter unit suits larger pools of up to 110 m³ of water. Both filter units have dedicated spaces and pipework fitted with removable couplings, allowing a hydrotherapy system and a separate heating circuit to be installed.

Customers who bought this product also bought: