Cable with swivel 1,2m Dyn 3 wires - 9995791-DL-DIY
Cable with swivel 1,2m Dyn 3 wires - 9995791-DL-DIY
Cable with swivel 1,2m Dyn 3 wires - 9995791-DL-DIY
Cable with swivel 1,2m Dyn 3 wires - 9995791-DL-DIY
Cable with swivel 1,2m Dyn 3 wires - 9995791-DL-DIY
Cable with swivel 1,2m Dyn 3 wires - 9995791-DL-DIY
Cable with swivel 1,2m Dyn 3 wires - 9995791-DL-DIY
Cable with swivel 1,2m Dyn 3 wires - 9995791-DL-DIY
Cable with swivel 1,2m Dyn 3 wires - 9995791-DL-DIY
Cable with swivel 1,2m Dyn 3 wires - 9995791-DL-DIY
Cable with swivel 1,2m Dyn 3 wires - 9995791-DL-DIY
Cable with swivel 1,2m Dyn 3 wires - 9995791-DL-DIY
Cable with swivel 1,2m Dyn 3 wires - 9995791-DL-DIY
Cable with swivel 1,2m Dyn 3 wires - 9995791-DL-DIY

Cable with swivel 1,2m Dyn 3 wires - 9995791-DL-DIY

9995791-DIY
€59.00
Tax included

*Please note that although we keep a very large stock of products, the range of spare parts for all 240+ Dolphin Robot models is extensive and certain items may not be available for immediate despatch. In this case, orders are usually processed within 2 days*

1,2 m floating cable with swivel connections for 3-wires Dolphin Dyn pool robots (therefore with remote control and / or bluetooth).
For a quick and easy DIY installation (DIY - Do It Yourself), this cable is already supplied complete with rubber grommet on side, connections and 3-pin plug wired for connection to the motor.
Specific for the following Dolphin pool robot models:
- Dolphin Dynamic Plus / 2002- Dolphin Superkleen (double cycle version)- Dolphin Ultrakleen- Dolphin Magic Luminous- Dolphin Sprite RC- Dolphin Mega M-Line
 
This floating cable is compatible with Dolphin robots produced from the year 2010 onwards.
 
PS: To adapt the cable to all the old robots produced before the year 2010, it is also necessary to purchase the new side panel with hole.

  • Card, Paypal, Bank Transfer
  • Delivery in 24/72h
  • 100% satisfied customers.
  • Worldwide Delivery Available
 

18m floating cable for Dolphin Diag pool robots without remote control and/or Bluetooth. 2 wires.

With Pivot: a system that does not twist the cable.

For quick and easy DIY installation, this cable comes complete with a rubber grommet on the side, connections, and a pre-wired 2-pin plug for connection to the motor.

This cable is compatible with the following Dolphin robots, manufactured from the year 2010:
Dolphin Diagnostic 2001
Dolphin Magic
Dolphin Sprite C
Dolphin Maxi
Dolphin Maxi 2.0
Dolphin Tiberius

Product added to wishlist